ប្រភេទទាំងអស់
EN

ទាំងអស់

ម៉ាស៊ីនផ្សារកែងដៃ

ម៉ាស៊ីនផ្សារកែងដៃ

លក្ខខណ្ឌដឹកជញ្ជូន៖EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP

ទូទាត់:ការទូទាត់ចុះក្រោម 30% ដោយ T / T, សមតុល្យធ្លាក់ចុះមុនពេលដឹកជញ្ជូន។

ពេល​វេលា​នាំ​មុខ:ក្នុងរយៈពេល 10-35 ថ្ងៃបន្ទាប់ពីទទួលបានការទូទាត់ចុះ។

ធានា:ក្នុងរយៈពេលមួយឆ្នាំគិតចាប់ពីកាលបរិច្ឆេទ B/L ។

  • ទិដ្ឋភាពទូទៅ
  • ប៉ា​រ៉ា​មែ​ត្រ
  • ស៊ើបអង្កេត
  • ផលិតផលដែលពាក់ព័ន្ធ
The weld is clean and can be set for continuous welding and seam welding.
Copper wire welding protection surface galvanized layer.
Medium frequency welding to ensure stable output of welding power.

The elbow welder is mainly used for the joint welding of the punching pieces elbow, and the inner welder and the outer welder to make the complete elbow.

ថាមពល380V 50Hz 3P
Welding Elbow Diameters∅80-∅250
Welding Elbow Angle45 ° 90 °
Welding ThicknessMiddle Steel :0.5-0.8mm
Galvanized Steel l:0.5-0.8mm
Stainless Steel :0.4-0.6mm
ល្បឿនផ្សារ3-9m / នាទី
Overlap Welding Width6mm
Copper Wire Diameter∅2.0-∅2.6mm
ទឹក​ត្រជាក់0.4Mpa 8.5L/Min
Air Compress0.8Mpa 600L/min≦20℃
Welding Power45KVA (单台)
ទំ​ង​ន់2.5T

ទទួលបាននៅលើ

ប្រភេទក្តៅ